Influence of Thermal Energy and Electronic Structure on the Refractive Index and Extinction Coefficient of MAPbI3 Perovskite Solar Cell Materials

Authors

  • Hassan Abdulsalam Yobe State University image/svg+xml
  • Ibrahim Gana Geidam

DOI:

https://doi.org/10.33003/fjs-2026-1012-5665

Keywords:

MAPbI3 perovskites, Refractive index, Extinction coefficient, Thermo-optic coefficient, Bandgap engineering, Spectroscopic ellipsometry, Perovskite solar cells

Abstract

The optical performance of perovskite solar cells depends strongly on the refractive index (n), extinction coefficient (k), temperature, and electronic structure of the absorber material. This study investigates the influence of thermal energy and bandgap variation on the optical constants of MAPbI3 perovskite absorbers using temperature-dependent spectroscopic ellipsometry data obtained over 298.15–348.15 K and bandgap energies of 1.58–1.77 eV. Linear regression was used to determine the thermo-optic coefficients (dn/dT and dk/dT) and bandgap-sensitivity coefficients (dn/dEg and dk/dEg), while derivative spectroscopy identified wavelength regions with enhanced optical sensitivity. The results show that temperature causes only modest changes in optical dispersion and absorption, indicating good thermal stability. In contrast, bandgap variation significantly reduces the refractive index and shifts the absorption edge toward shorter wavelengths, demonstrating that electronic-structure modification has a stronger influence on optical behaviour than thermal effects. The highest sensitivities occur near the absorption edge, where interband transitions dominate. These findings highlight bandgap engineering as the primary strategy for tuning the optical properties of perovskite absorbers and provide useful guidance for the design of efficient and thermally stable perovskite solar cells.

References

Afre, R. A., & Pugliese, D. (2024). Perovskite solar cells: a review of the latest advances in materials, fabrication techniques, and stability enhancement strategies. Micromachines, 15(2), 192. https://doi.org/https://doi.org/10.3390/mi15020192

Even, J., Pedesseau, L., Jancu, J.-M., & Katan, C. (2013). Importance of spin–orbit coupling in hybrid organic/inorganic perovskites for photovoltaic applications. The Journal of Physical Chemistry Letters, 4(17), 2999-3005. https://doi.org/https://doi.org/10.1021/jz401532q

Fox, M. (2010). Optical properties of solids (2nd ed., Vol. 3). Oxford university press.

Fujiwara, H. (2007). Spectroscopic Ellipsometry: Principles and Applications. John Wiley & Sons. https://doi.org/https://doi.org/10.1002/9780470060193

Ghosh, G. (1998). Handbook of optical constants of solids: Handbook of thermo-optic coefficients of optical materials with applications. Academic Press.

Green, M. A., Dunlop, E. D., Yoshita, M., Kopidakis, N., Bothe, K., Siefer, G., Jiang, J. Y. (2025). Solar cell efficiency tables (version 66). Progress in Photovoltaics, 33(NREL/JA--5900-94273). https://doi.org/https://doi.org/10.1002/pip.3919

Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014). The emergence of perovskite solar cells. Nature photonics, 8(7), 506-514. https://doi.org/https://doi.org/10.1038/nphoton.2014.134

Han, J., Park, K., Tan, S., Vaynzof, Y., Xue, J., Diau, E. W.-G., Jeon, I. (2025). Perovskite solar cells. Nature Reviews Methods Primers, 5(1), 3. https://doi.org/https://doi.org/10.1038/s43586-024-00373-9

Handa, T., Yamada, T., Nagai, M., & Kanemitsu, Y. (2020). Phonon, thermal, and thermo-optical properties of halide perovskites. Physical Chemistry Chemical Physics, 22(45), 26069-26087. https://doi.org/https://doi.org/10.1039/D0CP04426A

Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015). Compositional engineering of perovskite materials for high-performance solar cells. Nature, 517(7535), 476-480. https://doi.org/https://doi.org/10.1038/nature14133

Khurgin, J. B. (2022). Expanding the photonic palette: exploring high index materials. Acs Photonics, 9(3), 743-751. https://doi.org/https://doi.org/10.1021/acsphotonics.1c01834

Kim, E.-B., Akhtar, M. S., Shin, H.-S., Ameen, S., & Nazeeruddin, M. K. (2021). A review on two-dimensional (2D) and 2D-3D multidimensional perovskite solar cells: Perovskites structures, stability, and photovoltaic performances. Journal of Photochemistry and Photobiology C: Photochemistry Reviews, 48, 100405. https://doi.org/https://doi.org/10.1016/j.jphotochemrev.2021.100405

Kittel, C. (2018). Kittel's Introduction to Solid State Physics, Global Edition. Wiley.

Lamichhane, A. (2023). Energy-gap-refractive index relations in semiconductors—using wemple–DiDomenico model to unify moss, ravindra, and herve–vandamme relationships. Solids, 4(4), 316-326. https://doi.org/https://doi.org/10.3390/solids4040020

Lamichhane, A., & Ravindra, N. M. (2022). Energy gap–refractive index considerations in perovskites. Emerging Materials Research, 11(4), 423-429. https://doi.org/https://doi.org/10.1680/jemmr.22.00053

Afre, R. A., & Pugliese, D. (2024). Perovskite solar cells: a review of the latest advances in materials, fabrication techniques, and stability enhancement strategies. Micromachines, 15(2), 192. https://doi.org/https://doi.org/10.3390/mi15020192

Even, J., Pedesseau, L., Jancu, J.-M., & Katan, C. (2013). Importance of spin–orbit coupling in hybrid organic/inorganic perovskites for photovoltaic applications. The Journal of Physical Chemistry Letters, 4(17), 2999-3005. https://doi.org/https://doi.org/10.1021/jz401532q

Fox, M. (2010). Optical properties of solids (2nd ed., Vol. 3). Oxford university press.

Fujiwara, H. (2007). Spectroscopic Ellipsometry: Principles and Applications. John Wiley & Sons. https://doi.org/https://doi.org/10.1002/9780470060193

Ghosh, G. (1998). Handbook of optical constants of solids: Handbook of thermo-optic coefficients of optical materials with applications. Academic Press.

Green, M. A., Dunlop, E. D., Yoshita, M., Kopidakis, N., Bothe, K., Siefer, G., Jiang, J. Y. (2025). Solar cell efficiency tables (version 66). Progress in Photovoltaics, 33(NREL/JA--5900-94273). https://doi.org/https://doi.org/10.1002/pip.3919

Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014). The emergence of perovskite solar cells. Nature photonics, 8(7), 506-514. https://doi.org/https://doi.org/10.1038/nphoton.2014.134

Han, J., Park, K., Tan, S., Vaynzof, Y., Xue, J., Diau, E. W.-G., Jeon, I. (2025). Perovskite solar cells. Nature Reviews Methods Primers, 5(1), 3. https://doi.org/https://doi.org/10.1038/s43586-024-00373-9

Handa, T., Yamada, T., Nagai, M., & Kanemitsu, Y. (2020). Phonon, thermal, and thermo-optical properties of halide perovskites. Physical Chemistry Chemical Physics, 22(45), 26069-26087. https://doi.org/https://doi.org/10.1039/D0CP04426A

Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015). Compositional engineering of perovskite materials for high-performance solar cells. Nature, 517(7535), 476-480. https://doi.org/https://doi.org/10.1038/nature14133

Khurgin, J. B. (2022). Expanding the photonic palette: exploring high index materials. Acs Photonics, 9(3), 743-751. https://doi.org/https://doi.org/10.1021/acsphotonics.1c01834

Kim, E.-B., Akhtar, M. S., Shin, H.-S., Ameen, S., & Nazeeruddin, M. K. (2021). A review on two-dimensional (2D) and 2D-3D multidimensional perovskite solar cells: Perovskites structures, stability, and photovoltaic performances. Journal of Photochemistry and Photobiology C: Photochemistry Reviews, 48, 100405. https://doi.org/https://doi.org/10.1016/j.jphotochemrev.2021.100405

Kittel, C. (2018). Kittel's Introduction to Solid State Physics, Global Edition. Wiley.

Lamichhane, A. (2023). Energy-gap-refractive index relations in semiconductors—using wemple–DiDomenico model to unify moss, ravindra, and herve–vandamme relationships. Solids, 4(4), 316-326. https://doi.org/https://doi.org/10.3390/solids4040020

Lamichhane, A., & Ravindra, N. M. (2022). Energy gap–refractive index considerations in perovskites. Emerging Materials Research, 11(4), 423-429. https://doi.org/https://doi.org/10.1680/jemmr.22.00053

Ma, L., Xu, X., Cui, C., Li, T., Lou, S., Scott, P. J., Zeng, W. (2025). A review of measurement and characterization of film layers of perovskite solar cells by spectroscopic ellipsometry. Nanomaterials, 15(4), 282. https://doi.org/https://doi.org/10.3390/nano15040282

McLachlan, A. D., & Meyer, F. P. (1987). Temperature dependence of the extinction coefficient of fused silica for CO2 laser wavelengths. Applied Optics, 26(9), 1728-1731. https://doi.org/https://doi.org/10.1364/AO.26.001728

Minemoto, T., & Murata, M. (2014). Device modeling of perovskite solar cells based on structural similarity with thin film inorganic semiconductor solar cells. Journal of applied physics, 116(5). https://doi.org/https://doi.org/10.1063/1.4891982

Moss, T. (1950). A relationship between the refractive index and the infra-red threshold of sensitivity for photoconductors. Proceedings of the Physical Society. Section B, 63(3), 167-176. https://doi.org/https://doi.org/10.1088/0370-1301/63/3/302

Nie, T., Fang, Z., Ren, X., Duan, Y., & Liu, S. (2023). Recent advances in wide-bandgap organic–inorganic halide perovskite solar cells and tandem application. Nano-Micro Letters, 15(1), 70. https://doi.org/https://doi.org/10.1007/s40820-023-01040-6

NREL. (2022). Best Research-Cell Efficiency Chart. https://www.nrel.gov/pv/cell-efficiency.html

Pankove, J. I. (2012). Optical processes in semiconductors. Courier Corporation. https://doi.org/https://doi.org/10.1149/1.2404256

Peter, Y., & Cardona, M. (2010). Fundamentals of semiconductors: physics and materials properties. Springer Science & Business Media. https://doi.org/https://doi.org/10.1007/978-3-642-00710-1

Raja, W., Allen, T. G., Said, A. A., Alharbi, O., Aydin, E., De Bastiani, M., & De Wolf, S. (2022). Temperature-dependent optical modeling of perovskite solar cells. The Journal of Physical Chemistry C, 126(33), 14366-14374. https://doi.org/https://doi.org/10.1021/acs.jpcc.2c04768

Saleh, B. E. A., & Teich, M. C. (2013). Fundamentals of Photonics. Wiley.

Snaith, H. J. (2013). Perovskites: the emergence of a new era for low-cost, high-efficiency solar cells. The Journal of Physical Chemistry Letters, 4(21), 3623-3630. https://doi.org/https://doi.org/10.1021/jz4020162

Stranks, S. D., & Snaith, H. J. (2015). Metal-halide perovskites for photovoltaic and light-emitting devices. Nature nanotechnology, 10(5), 391-402. https://doi.org/https://doi.org/10.1038/nnano.2015.90

Tauc, J., Grigorovici, R., & Vancu, A. (1966). Optical properties and electronic structure of amorphous germanium. physica status solidi (b), 15(2), 627-637. https://doi.org/https://doi.org/10.1002/pssb.19660150224

Tropf, W. J., Thomas, M. E., & Linevsky, M. J. (1998). Infrared refractive indices and thermo-optic coefficients for several materials. Optical Diagnostic Methods for Inorganic Transmissive Materials,

Wright, A. D., Verdi, C., Milot, R. L., Eperon, G. E., Pérez-Osorio, M. A., Snaith, H. J.,…Herz, L. M. (2016). Electron–phonon coupling in hybrid lead halide perovskites. Nature communications, 7(1), 11755. https://doi.org/https://doi.org/10.1038/ncomms11755

Wavelength-dependent coefficient of determination (R²) for the regression models used to determine (a) thermo-optic coefficients (dn/dT and dk/dT) and (b) bandgap-sensitivity coefficients (dn/dEg and dk/dEg), demonstrating the reliability of the linear approximation across the investigated spectral range

Downloads

Published

31-07-2026

How to Cite

Abdulsalam, H., & Geidam, I. G. (2026). Influence of Thermal Energy and Electronic Structure on the Refractive Index and Extinction Coefficient of MAPbI3 Perovskite Solar Cell Materials. FUDMA JOURNAL OF SCIENCES, 10(12), 252-262. https://doi.org/10.33003/fjs-2026-1012-5665

Most read articles by the same author(s)