SIMULATION-BASED IMPLEMENTATION OF MAGNETIC FIELD ORIENTATION FOR ACCURATE INDUCTION

Gisin, F. and Pantic-Tanner, Z. (2001) “Radiation from Printed Circuit Board Edge Structures”, IEEE Transactions on Electromagnetic Compatibility, Vol. 37, No. 2.

Hadass, T., Shuki W., Alexander F., Eli P., Tamar P., Michal, L.,Alon, K., Yosef, Y., Izhar, B. (2011) ” Mini-coil for magnetic stimulation in the behaving primate”, “Journal of Neuroscience Methods”, Vol.194. pp. 242–251.

Hockanson, D. M., Drewniak, J. L. , Hubing, T. H., Van Doren, T. P., Sha, F. Lam, C. and Rubin, L. (1997) “Quantifying EMI resulting from finite-impedance reference planes,” IEEE Trans. Electromagn. Compat., vol. 39, no. 4, pp. 286–297.

Johan, M., Marion, W., Jean-Pau,l G., Elisabeth D. and Alain B. (2006) “High Current Densities In Copper Microcoils: Influence Of Substrate On Failure Mode”, “Dtip Of Mems And Moems”, pp.12-18.

John, B. and Stanislaw O. (2003) “Field line motion in classical electromagnetism”, “Am. J. Physics”, Vol.71, pp.220-221.

John T. C. (2009) “Copper Wire Tables”, “National Bureau of Standards Handbook- Office of Engineering Standards Institute for Applied Technology National Bureau of Standards Washington”.

Marco, L. (2005) “Radiated Susceptibility on the PrintedCircuit-Board Level: Simulation and Measurement”, IEEE Transactions on Electromagnetic Compatibility, Vol. 47, No. 3.

Martin, S. (2011) “Avoid PC-Layout "Gotchas" in ISM-RF Products”, “TUTORIAL 4636, Maxim Integrated Co.”, pp.5-8.

Shaowei, D., Todd, H.H., and Daryl, G. B. (2008) “Using TEM Cell Measurements to Estimate the Maximum Radiation From PCBs With Cables Due to Magnetic Field

Coupling” IEEE Transactions on Electromagnetic Compatibility, Vol. 50, No. 2, May 2008.

Shim, H. W. and Hubing, T. H. (2005) “Model for estimating radiated emissions from a printed circuit board with attached cables driven by voltage-driven sources,” IEEE Trans. Electromagn. Compat., vol. 47, no. 4, pp. 899– 907.

Young H.D. and Freedman R.A. (1998) “ University Physics Textbook” 9th Edition pp. 943. Addison-Wesley Publishing Company, Inc.