PERFORMANCE ASSESSMENT OF A SINGLE CHAMBER MICROBIAL FUEL CELL (MFC)
Abstract
Microbial fuel cells (MFCs) represent renewable energy technology with potential applications in electricity generation. This study aimed to construct and evaluate the performance of a single-chamber MFC using soil samples. Two MFCs were built for this purpose: one to assess performance by monitoring the variation of voltage and current over time, and the other to examine the effect of cathode surface area on MFC performance. Microbial fuel cells are important due to their potential to generate renewable energy, treat wastewater, remediate contaminated environments, serve as biosensors, and be scalable and integrated with other technologies, making them a promising solution for addressing various environmental and energy challenges. Notable results included recording maximum currents and voltages of 2.2 mA and 0.6 V, respectively, which elucidated the non-linear relationship between current and voltage. Additionally, it was found that the cathode surface area has a direct impact on the current produced. The polarization curve, illustrating current density as a function of voltage, was also analyzed. Another significant finding was a coulombic efficiency of 92.6%. Furthermore, connecting the MFCs in series achieved a voltage of 1.363 V. These results indicate substantial progress in the field. This study contributed to the advancement of MFC technology and its potential for practical applications in renewable energy generation, wastewater treatment, and environmental sustainability.
References
Aelterman, P, Rabaey, K, Pham, H.T, Boon, N, Verstraete, W., (2017). Continuous electricity generation athigh voltages and currents using stacked microbial fuel cells. Environ. Sci. Technol. 40: 3388–3394 DOI: https://doi.org/10.1021/es0525511
Aelterman, P., Versichele, M., Marzorati, M., Boon, N., and Verstraete, W,(2018) “Loading RateAndexternal resistance control the electricity generation of microbial fuel cells with different three-dimensional anodes,” Bioresour. Technol., vol. 99, no. 18, pp. 8895–8902. DOI: https://doi.org/10.1016/j.biortech.2008.04.061
Alzate-Gaviria, L., (2016). “Microbial Fuel Cells for Wastewater Treatment,” Diss Yucatan Cent.Sci.Res. NdNpMicrob. Fuel Cells Waste Water Treat. Web.
Atanassoc, P,(2020). "Enzymatic Biofuel Cells," The Electrochemical Society Interface, p. 2.
Boyle, W., (2016). "The Science of CHEMICAL OXYGEN DEMAND," Technical Information Series, Booklet No. 9 ,p. 4.
Bullen, R.A., Arnot, T.C., Lakeman, J.B., and Walsch, F.C, (2016). “Biofuel cells and their development,” Biosens. Bioelectron., vol. 21, pp. 2015–2045. DOI: https://doi.org/10.1016/j.bios.2006.01.030
Donovan, C., Dewan, A., Heo, D., & Beyenal, H. (2013). Batteryless, wireless sensor powered by a sediment microbial fuel cell. Environmental Science & Technology, 47(2), 668-673.
Du, Z., Li, H., and Gu T, (2021). “A state of the art review on microbial fuel cells: A promising Exchange Membrane in a Dual Chambered Microbial Fuel Cell.International Journal of Engineering Science and Technology (IJEST), Nigeria. 4(1): 227-238.
Fernández de Dios, M.A., Del Campo, A.G., Fernández, F.J., Rodrigo, M., Pazos, M., and Sanromán, M.A., (2013). “Bacterial–fungal interactions enhance power generation in microbial fuel cells and drive dye decolourisation by an ex situ and in situ electro-Fenton process,” Bioresour. Technol., vol. 148, pp. 39–46. DOI: https://doi.org/10.1016/j.biortech.2013.08.084
Gude, V. G. (2016). Microbial fuel cells: Recent advancements and future prospects. Bioresource Technology, 213, 299-308.
Hicks, C., (2016). "Morocco lights the way for Africa on renewable energy," the guardian. https://en.wikipedia.org/wiki/Fossilfuel retrieved on 5/7/2021.
Kim, H.J, Hyun, M.S., Chang, I.S., and Kim, B.H., (1999) “A microbial fuel cell type lactate Biosensorusing a metal-reducing bacterium, Shewanellaputrefaciens,” J MicrobiolBiotechnol, vol. 9, no. 3, pp. 365–367.
Liu, H, Cheng, S and Logan, B.E, (2015), “production of electricity from Acetate or Butyrate Usinga single chamber microbial fuel cell; environ. Sci. Technol. 39, PP 658-662. DOI: https://doi.org/10.1021/es048927c
Liu, L., Tsyganova, O., Lee, D.J, Chang, J.S, Wang, A., and Ren, N., (2013). “Double-chamber Microbialfuel cells started up under room and low temperatures,” Int. J. Hydrog. Energy, vol. 38, no. 35, pp.15574–15579. DOI: https://doi.org/10.1016/j.ijhydene.2013.02.090
Livinus, A. O, Charles, C.O. and Akuma,O., (2012).Performance of Cassava Starch as a Proton.Vol 2: pp 120-127.
Logan, B.E., (2006). "Microbial Fuel Cells: Methodology and Technology," American Chemical Society, pp. 1-10. DOI: https://doi.org/10.1016/S0958-2118(06)70791-1
Logan, B. E. (2008). Microbial fuel cells. John Wiley & Sons. DOI: https://doi.org/10.1002/9780470258590
Logan, B.E., (2018). Microbial Fuel Cells.John Wiley & Sons. P. 130-134.
Mansoorian, H.J., Mahvi, A.H., Jafari, A.J, Amin, M.M, Rajabizadeh, A., and Khanjani, N. (2013). “Bioelectricity generation using two chamber microbial fuel cell treating wastewater from food processing,” Enzyme Microb. Technol., vol. 52, no. 6–7, pp. 352–357. DOI: https://doi.org/10.1016/j.enzmictec.2013.03.004
Ngo, T.T., Yu, T.L., and Lin, H.L., (2013). “Nafion-based membrane electrode assemblies prepared from catalyst inks containing alcohol/water solvent mixtures,” J. Power Sources, vol. 238, pp. 1–10. DOI: https://doi.org/10.1016/j.jpowsour.2013.03.055
Park DH, Zeikus JG, (2020). Improved fuel cell and electrode designs for producing electricity from microbial degradation. Biotechnol.Bioeng.; 81:348–355. DOI: https://doi.org/10.1002/bit.10501
Potter, M., (1911)."Electrical Effects Accompanying The Decomposition of Organic Compounds,"royalsocietypublishing, pp. 111-260. DOI: https://doi.org/10.1098/rspb.1911.0073
Rabaey, K, and Verstaete, W, (2003). “A microbial fuel cell capable of converting glucose to electricity at high rate and efficiency.” Biotechnol.Let.25(18) 1531-1535. DOI: https://doi.org/10.1023/A:1025484009367
Rabaey K. and Verstraete W., (2005). “Microbial fuel cells: novel biotechnology for energy generation,”Trends Biotechnol., vol. 23, no. 6, pp. 291–298. DOI: https://doi.org/10.1016/j.tibtech.2005.04.008
Rittmann, B. E., and McCarty, P. L., (2013). Environmental Biotechnology: Principles and Applications.McGraw-Hill Series in Water Resources and Environmental Engineering, Boston, MA, USA.
Sami, E.O., and Flimban, A.G., (2018). "Overview of Microbial Fuel Cell (MFC) Recent Advancement from Fundamentals to Applications: MFC Designs, Major Elements, and Scalability," preprints, p. 48. DOI: https://doi.org/10.20944/preprints201810.0763.v1
Simeon, MI, Raji, A.O.,(2016).Experimental utilization of urine to recharge soil microbial fuel cell forconstant power generation. Res J Eng Environ Sci;1(1): 129- 135.
Song Z., (2017)."Characterization of kinetics and performance in a microbial fuel cell supplied Withsynthetic landfill leachate," Michigan Technological Univeristy Michigan Tech Divgital Commons Dissertation master's thesis , p. 30.
Wang, X, Feng, Y.J and Lee, H., (2008), “physicochemical properties of sago starch modified by acid treatment in alcohol”, American Journal of Applied Science 5(4): 307-311. DOI: https://doi.org/10.3844/ajassp.2008.307.311
Wang, H., Park, J. D., & Ren, Z. J. (2015). Practical energy harvesting for microbial fuel cells: a review. Environmental Science & Technology, 49(6), 3267-3277. DOI: https://doi.org/10.1021/es5047765
Wei, J., Liang, P., and Huang, X., (2019). “Recent progress in electrodes for microbial fuel cells,”Bioresour.Technol., vol. 102, no. 20, pp. 9335–9344. DOI: https://doi.org/10.1016/j.biortech.2011.07.019
Won, J.H, Lee, H.J., Lim, J.M, Kim, J.H, Hong, Y.T, and Lee, S.Y, (2014). “Anomalous behavior of protontransport and dimensional stability of sulfonated poly(arylene ether sulfone)nonwoven/silicate composite 17 proton exchange membrane with dual phase co-continuous morphology,” J. Membr. Sci., vol. 450, pp. 235–241. DOI: https://doi.org/10.1016/j.memsci.2013.09.019
Zhuang, L., Zhou, S., Wang, Y., Liu, Y.C., and Geng, S., (2009). “Membrane-less cloth cathode Assembly(CCA) for scalable microbial fuel cells,” Biosens.Bioelectron., vol. 24, no. 12, pp. 3652–3656. DOI: https://doi.org/10.1016/j.bios.2009.05.032
Copyright (c) 2024 FUDMA JOURNAL OF SCIENCES
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
FUDMA Journal of Sciences