DETERMINATION OF HEAVY METAL CONCENTRATION IN DIFFERENT PARTS OF AZANZA GARKEANA PLANT AND THE CULTIVATED SOIL USING AAS TECHNIQUE
Keywords:
Medicinal plants, Gombe State, Toxic, Plants partsAbstract
Azanza garckeana is an edible fruit with medicinal values in the treatment of different ailments. The presence of Six Heavy metals (Cd, Co, Cr, Mn, Ni, and Pb) in different components of Azanza garckeana plant (seed, leaves, pulp and bark) and the cultivated soil, in part of Tula Kantungo LGA of Gombe State is investigated using atomic adsorption spectrometry (AAS). Digestion of the samples was carried out by mixing 2 g of each sample with solution of HCL and HNO3 in the ratio 2:1 and then heated at 100 oC for 1 hour. The concentration of the heavy metals in the seed, leaves, pulp, bark and soil are found to be in the range of 0.001- 0.791 ppm for Mn, 0.010-0.372 ppm for Co, 0.067-0.264 ppm for Cr, 0.006-0.237 ppm for Pb. 0.002-0.200 ppm for Ni, and 0.001-0.002 ppm for Cd. These values were compared with the recommended values set by World Health Organization (WHO) and Federal Environmental Protection Agency (FEPA)
References
AOCS (1996). Sampling and analysis of commercial flats and triglycerides official methods of analysis of the American triglycerides chemist SOC., pp 801-855.
ASTM D5895-03 (2003), Standard method for evaluating Drying or curing during film formation of Organic Coatings. Annual book of ASTM Standards Vol. 06(01).
Adnan H and Inn-Kyu K (2014). Preparation of Silver Nanoparticles and Their Industrial and Biomedical Applications. Department of Polymer Science and Engineering, Kyungpook National University, pp 702-701.
Aghaie, H., Ilkhani, A.R., and Choobeh S. M. S. (2012). Utilization Soya Bean Fatty Acid for Synthesis of Alkyd Resin and Comparation of Properties with Other Vegetable Oils., 6(15).
Aigbodion, A. I., Pillai, C.K.S., Bakare, I.O., and Yahaya, L.E. (2001). Synthesis, Characterisation and Activity of Heated Rubber Seed Oil and Rubber Seed Oil-Modified Alkyd Resins as Binders in Surface Coatings. Technol., 8, Pp.378-384.
Bora, M. M., Gogoi, P., Deka, D.C., Kakati, D.K. (2014). Synthesis and characterization of yellow oleander (Thevetia peruviana) seed oil-based alkyd resin Industrial Crops and Products. 52, Pp. 721-728.
Behera, S. S., Jha, S., Arakha, M., and Panigrahi, T. K. (2013). Synthesis of Silver Nanoparticles from Microbial Source-A Green Synthesis Approach, and Activity of its Antimicrobial Activity against Escherichia coli. International Journal of Engineering Research and Applications, 3(2), Pp. 58-62.
Cornelia G., Alexandra P., Denisa F., Anton F. and Cezar C. (2013). Antimicrobial coatings
obtaining and characterization. Mater. Sci.:36(2), 183–188.
Dhand, V., Soumya, L., Bharadwaj, S., Chakra, Bhatt, S. D., and Sreedhar, B. (2015). Green
synthesis of silver nanoparticles using Coffea arabica seed extract and its antibacterial activity. Materials Science and Engineering, 58: 36-43.
Guran, C., Pica, A., Fical, D.,Ficai, A ., and Comanescu, C (2013). Antimicrobial coatings—obtaining and characterization. Bull. Mater. Sci., 36(2), 183-188.
Published
How to Cite
Issue
Section
FUDMA Journal of Sciences