DESIGN AND IMPLEMENTATION OF AUTOMATIC LIGHT CONTROL WITH BIDIRECTIONAL COUNTING SENSOR
Abstract
This paper present design and Implementation Automatic Light Control with Bidirectional counting Sensor. In the design, Light Control with Bidirectional Counting Sensor is proposed to be used so that controller-based model is adopt to count the number of persons entering or leaving a particular building and accordingly turn on or turn off lighting in the building. A sensor is used with counters to count the number of people entering or leaving a particular building. The logic behind the design is that whenever a person enters, it counts up and when a person leaves its count down. The light control of the system is actualized when an individual enter and remains off when left. The designed is achieved using infrared light sensor and combination of array counter. When implemented, the design can be used in public places like malls or library to restrict the flow of people.
References
April). A design approach of automatic visitor counting system using video camera. Journal of Electrical and Electronics Engineering, Vol. 10(Issue 2), pp. 62-67. Retrieved from www.iosrjournals.org
Bai, Y. W., & Ku, Y.-T. (2008). Automatic room light intensity detection and control using a microprocessor and light sensors. Academia, pp. 1173-1176.
Dey, A., Chakraborty, S., Islam, S. S., Pramanik, M., & Malick, A. H. (2016, May). Design of controllable bidirectional visitor counter. International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering, Vol. 4(Issue 5), pp. 133-136.
Diodes Incorporates. (2012). Precision timers. ST. Retrieved from www.diodes.com
Mitchell, C. (2011). 50 555 Circuits. Brasilia.
Priya, S. V., & Vijayan, M. (2017, June 11th). Automatic street light control system using WSN based on vehicle movement and atmospheric condition. International Journal of Communication and Computer Technologies, Vol. 05(Issue 01), pp. 6-11. Retrieved from http://www.ijccts.org
Ranjit, S. S., Ibrahim, A. F., Salim, S. I., & Wong, Y. C. (2009). Door sensors for automatic light switching system. Academia, pp. 574-578.
Raziei, S. A., & Mohsenian-Rad, H. (n.d.). Optimal Demand Response Capacity of Automatic Lighting Control. pp.1-6.
ST. (2001). Dual J-K Flip Flop with Preset and Clear.
Sudhakar, K. S., Anil, A. A., Ashok, K. c., & Bhaskar, S. S. (2013, May). Automatic street light control system. International Journal of Emerging Technology and Advanced Engineering, Vol. 3(Issue 5), pp188-189.
Tadimeti, H. C., & Pulipati, M. (2013, April). Overview of automation systems and home appliances control using PC and Microcontroller. International Journal of Science and Research (IJSR), India, Vol. 2(Issue 4), pp. 127-131. Retrieved from www.ijsr.net
Telefunken, V. (2001). Photo modules for PCM remote control systems. Vishay. Retrieved from www.vishay.com
Wazed, M. A., Nafis, N., Islam, M. T., & Sayem, A. S. (2010, July). Design and fabrication of automatic street light control system. Academia, Vol. 5, pp. 27-34. Retrieved from http://ejum.fsktm.um.edu.my
Baballe, A. B., Bello, M.I., Umar, A.A,.et all (2022,April). Visitor Counter with Gate Control and Automatic Room Light Controller (ON/OFF).Global Journal of Research in Engineering & Computer Sciences Vol. 02 pp 32 – 40.
Kumar, M., Singh, T, D., (2022, March). Design and Implementation of Unidirectional Visitor Counter Using Bluetooth and FPGA. International Journal of Early Childhood Special Education, Vol 14, Issue 03
Copyright (c) 2023 FUDMA JOURNAL OF SCIENCES
This work is licensed under a Creative Commons Attribution 4.0 International License.
FUDMA Journal of Sciences
